Takgol spraypaint company is an iranian spraypaint company that produces beside spraypaint even products like wd40, dashboard wax, anjector cleaner, glue and silicon spray.

But of course the main product of takgol spraypaint company is spraypaints. One is 300 ml spraypaint with alkyd color, the other is 400 ml multi purpose spraypaint with acrylic color and the third is 400 ml takgol graffiti spraypaint.

How to mix white and red to create RAL 3018

RAL 3018 is a specific shade of red called “Strawberry Red and is code 14 in takgol spraypaint catalogue.” Mixing white and red colors can be a bit tricky since the resulting shade will depend on the specific white and red pigments you’re using. However, we can provide you with a general guideline on how to achieve a similar color.

To create a shade similar to RAL 3018, you’ll want to start with a bright red color and gradually add white to lighten it. Here’s a step-by-step approach:

1. Start with a bright red paint or pigment as your base color. This can be a pure red pigment or a bright red paint from your preferred brand.
2. Take a small amount of the red paint and mix it with an equal amount of white paint. Blend them thoroughly until the color is well-mixed. This will give you a lighter shade of red.
3. Assess the resulting color. If it’s not close enough to RAL 3018, you can continue adding small amounts of white paint to lighten the mixture further. Remember to mix well after each addition until you achieve the desired color.
4. Keep adjusting the ratio of red and white until you’re satisfied with the final color match. It’s a good idea to compare the mixed color to a reference of RAL 3018 or a color chart to ensure accuracy.

Remember that the specific brand, type of paint or pigment, and the amount of white added can influence the final result. Experimenting with small quantities and keeping track of your measurements will help you fine-tune the color mixture.

Alternatively, you can also consider purchasing a pre-mixed paint or pigment in the RAL 3018 shade if available from a reliable paint supplier. This will ensure a more accurate and consistent result.

Please note that colors can vary based on personal perception and the display or printing medium used, so it’s always recommended to consult physical color samples or professional references for precise color matching.

Creating RAL colors

Takgol spraypaint company has 7 colors in its disposal to create the RAL colors in its catalogue. It is black, white, red, yellow, blue, green and mustard.

Creating all RAL colors using only seven pure colors (black, white, red, blue, green, blue, and mustard) is a complex task. RAL is a standardized color matching system that encompasses a wide range of colors with specific formulations. Each RAL color is composed of different pigments and requires precise ratios to achieve the desired result.

While it may be challenging to reproduce the entire RAL color spectrum using only seven colors, you can still create various shades and tones by mixing these colors together. However, note that the resulting shades might not precisely match the standardized RAL colors.

To start experimenting with mixing your available colors, consider the following general guidelines:

1. Begin by creating primary colors:
   • Red: Use the red color you have.
   • Yellow: Mix the mustard color with a small amount of white to lighten it.
   • Blue: Utilize the blue color you have.
2. Combine the primary colors to create secondary colors:
   • Green: Mix blue and yellow together.
   • Purple: Mix red and blue together.
   • Orange: Mix red and yellow together.
3. Adjust the primary, secondary, and intermediate colors to create various shades and tones:
   • To darken a color, add small amounts of black.
   • To lighten a color, add small amounts of white.

Remember to mix the colors thoroughly and assess the result after each addition. Keep track of the ratios and quantities you use for future reference.

While this approach can help you create a range of colors, it’s important to note that due to the limited palette, you might not be able to replicate the full spectrum of RAL colors accurately. For precise and consistent results, it’s recommended to consult professional color charts or consider using pre-mixed paints specifically formulated to match RAL colors.

Additionally, keep in mind that colors can appear differently based on lighting conditions, monitor calibration, and personal perception. For critical applications, it’s advisable to rely on physical color samples or professional color matching services to ensure accurate color reproduction.